As a specific clay minerals, it is a layered silicate, and its three-layer structure consists of two tetrahedral body layers. Eight sided aluminum can be replaced with magnesium, which can lead to excessive negative charges. This negative charge is compensated for by different unit prices and divalent cations. Due to the typical crystal structure, the basic particles of montmorillonite have aerated soil flow additives used in water based systems. Montmorillonite has high negative charge on the surface and low positive charge on the edge. The processed bentonite has a high proportion of surface area and high cation switching function. Select raw materials from mines and process them to obtain high-performance products. The main advantage is to reduce the current cellulose tactile sensation. The current alternative to mineral tactical agents, which are resistant to microbial invasion, temperature resistance, high pH stability, and improve typical additional dosage, depends on application and required action to maintain performance of 0.3 to 3.0%.

The main features and applications of building products, such as mortar, gypsum, mud, floor systems, and building adhesives, are important for flow control, providing thickening and retaining water. In order to change liquidity and application performance, it is used for various types of application performance. In the building system. Bentonite is suitable for good and good epoxy systems, suitable for sealing materials, and suitable for solid resistance during impregnation. The soil produces relatively high viscosity. By mixing, the pump viscosity is reduced and can now be easily handled. In addition, thin clay minerals act as lubricants. The friction between sand and other particles in the formula is reduced, making filling and smoothing easier, and the pumping performance is much better as the pump pressure decreases.